§3-4A-11a. Ballots tabulated electronically; arrangement, quantity to be printed, ballot stub numbers. (a) The board of ballot commissioners in counties using ballots upon which votes may be recorded by means of marking with electronically sensible ink or pencil and which marks are tabulated electronically shall cause the ballots to be printed or displayed upon the screens of the electronic voting system for use in elections.
(b)(1) For the primary election, the heading of the ballot, the type faces, the names and arrangement of offices and the printing of names and arrangement of candidates within each office are to conform as nearly as possible to the provisions of sections thirteen and thirteen-a, article five of this chapter.
(2) For the general election, the heading of the ballot, the straight ticket positions, the instructions to straight ticket voters, the type faces, the names and arrangement of offices and the printing of names and the arrangement of candidates within each office are to conform as nearly as possible to the provisions of section two, article six of this chapter, except as otherwise provided in this article.
(3) Nonpartisan elections for board of education and any question to be voted upon are to be separated from the partisan ballot and separately headed in display type with a title clearly identifying the purpose of the election and constituting a separate ballot wherever a separate ballot is required under the provisions of this chapter.
(4) Both the face and the reverse side of the ballot may contain the names of candidates only if means to ensure the secrecy of the ballot are provided and lines for the signatures of the poll clerks on the ballot are printed on a portion of the ballot which is deposited in the ballot box and upon which marks do not interfere with the proper tabulation of the votes.
(5) The arrangement of candidates within each office is to be determined in the same manner as for other electronic voting systems, as prescribed in this chapter. On the general election ballot for all offices, and on the primary election ballot only for those offices to be filled by election, except delegate to national convention, lines for entering write-in votes are to be provided below the names of candidates for each office, and the number of lines provided for any office shall equal the number of persons to be elected, or three, whichever is fewer. The words "WRITE-IN, IF ANY" are to be printed, where applicable, directly under each line for write-ins. The lines are to be opposite a position to mark the vote.
(c) Except for electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary election ballots are to be printed in the color of ink specified by the Secretary of State for the various political parties, and the general election ballot is to be printed in black ink. For electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary ballots and the general election ballot are to be printed in black ink. All ballots are to be printed, where applicable, on white paper suitable for automatic tabulation and are to contain a perforated stub at the top or bottom of the ballot, which is to be numbered sequentially in the same manner as provided in section thirteen, article five of this chapter, or are to be displayed on the screens of the electronic voting system upon which votes are recorded by means of a stylus or touch. The number of ballots printed and the packaging of ballots for the precincts are to conform to the requirements for paper ballots provided in this chapter.
(d) In addition to the official ballots, the ballot commissioners shall provide all other materials and equipment necessary to the proper conduct of the election.
§3-4A-11a. Ballots tabulated electronically; arrangement, quantity to be printed, ballot stub numbers. (a) The board of ballot commissioners in counties using ballots upon which votes may be recorded by means of marking with electronically sensible ink or pencil and which marks are tabulated electronically shall cause the ballots to be printed or displayed upon the screens of the electronic voting system for use in elections.
(b)(1) For the primary election, the heading of the ballot, the type faces, the names and arrangement of offices and the printing of names and arrangement of candidates within each office are to conform as nearly as possible to the provisions of sections thirteen and thirteen-a, article five of this chapter.
(2) For the general election, the heading of the ballot, the straight ticket positions, the instructions to straight ticket voters, the type faces, the names and arrangement of offices and the printing of names and the arrangement of candidates within each office are to conform as nearly as possible to the provisions of section two, article six of this chapter, except as otherwise provided in this article.
(3) Nonpartisan elections for board of education and any question to be voted upon are to be separated from the partisan ballot and separately headed in display type with a title clearly identifying the purpose of the election and constituting a separate ballot wherever a separate ballot is required under the provisions of this chapter.
(4) Both the face and the reverse side of the ballot may contain the names of candidates only if means to ensure the secrecy of the ballot are provided and lines for the signatures of the poll clerks on the ballot are printed on a portion of the ballot which is deposited in the ballot box and upon which marks do not interfere with the proper tabulation of the votes.
(5) The arrangement of candidates within each office is to be determined in the same manner as for other electronic voting systems, as prescribed in this chapter. On the general election ballot for all offices, and on the primary election ballot only for those offices to be filled by election, except delegate to national convention, lines for entering write-in votes are to be provided below the names of candidates for each office, and the number of lines provided for any office shall equal the number of persons to be elected, or three, whichever is fewer. The words "WRITE-IN, IF ANY" are to be printed, where applicable, directly under each line for write-ins. The lines are to be opposite a position to mark the vote.
(c) Except for electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary election ballots are to be printed in the color of ink specified by the Secretary of State for the various political parties, and the general election ballot is to be printed in black ink. For electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary ballots and the general election ballot are to be printed in black ink. All ballots are to be printed, where applicable, on white paper suitable for automatic tabulation and are to contain a perforated stub at the top or bottom of the ballot, which is to be numbered sequentially in the same manner as provided in section thirteen, article five of this chapter, or are to be displayed on the screens of the electronic voting system upon which votes are recorded by means of a stylus or touch. The number of ballots printed and the packaging of ballots for the precincts are to conform to the requirements for paper ballots provided in this chapter.
(d) In addition to the official ballots, the ballot commissioners shall provide all other materials and equipment necessary to the proper conduct of the election.
§3-4A-11a. Ballots tabulated electronically; arrangement, quantity to be printed, ballot stub numbers. (a) The board of ballot commissioners in counties using ballots upon which votes may be recorded by means of marking with electronically sensible ink or pencil and which marks are tabulated electronically shall cause the ballots to be printed or displayed upon the screens of the electronic voting system for use in elections.
(b)(1) For the primary election, the heading of the ballot, the type faces, the names and arrangement of offices and the printing of names and arrangement of candidates within each office are to conform as nearly as possible to the provisions of sections thirteen and thirteen-a, article five of this chapter.
(2) For the general election, the heading of the ballot, the straight ticket positions, the instructions to straight ticket voters, the type faces, the names and arrangement of offices and the printing of names and the arrangement of candidates within each office are to conform as nearly as possible to the provisions of section two, article six of this chapter, except as otherwise provided in this article.
(3) Nonpartisan elections for board of education and any question to be voted upon are to be separated from the partisan ballot and separately headed in display type with a title clearly identifying the purpose of the election and constituting a separate ballot wherever a separate ballot is required under the provisions of this chapter.
(4) Both the face and the reverse side of the ballot may contain the names of candidates only if means to ensure the secrecy of the ballot are provided and lines for the signatures of the poll clerks on the ballot are printed on a portion of the ballot which is deposited in the ballot box and upon which marks do not interfere with the proper tabulation of the votes.
(5) The arrangement of candidates within each office is to be determined in the same manner as for other electronic voting systems, as prescribed in this chapter. On the general election ballot for all offices, and on the primary election ballot only for those offices to be filled by election, except delegate to national convention, lines for entering write-in votes are to be provided below the names of candidates for each office, and the number of lines provided for any office shall equal the number of persons to be elected, or three, whichever is fewer. The words "WRITE-IN, IF ANY" are to be printed, where applicable, directly under each line for write-ins. The lines are to be opposite a position to mark the vote.
(c) Except for electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary election ballots are to be printed in the color of ink specified by the Secretary of State for the various political parties, and the general election ballot is to be printed in black ink. For electronic voting systems that utilize screens upon which votes may be recorded by means of a stylus or by means of touch, the primary ballots and the general election ballot are to be printed in black ink. All ballots are to be printed, where applicable, on white paper suitable for automatic tabulation and are to contain a perforated stub at the top or bottom of the ballot, which is to be numbered sequentially in the same manner as provided in section thirteen, article five of this chapter, or are to be displayed on the screens of the electronic voting system upon which votes are recorded by means of a stylus or touch. The number of ballots printed and the packaging of ballots for the precincts are to conform to the requirements for paper ballots provided in this chapter.
(d) In addition to the official ballots, the ballot commissioners shall provide all other materials and equipment necessary to the proper conduct of the election.
