Section 32-6-57 Manufacturing specifications for license tags or plates. - Alabama Statutes

State Codes and Statutes

Statutes > Alabama > Title32 > Chapter6 > 32-6-57

Section 32-6-57

Manufacturing specifications for license tags or plates.

(a) Effective January 1, 1987, every license tag or plate issued under the provisions of this section and Sections 40-12-273, 40-12-274 shall be manufactured in such a manner as to meet the minimum federal performance standards as set out in Table I of the Society of Automotive Engineers Standard J594e, "Reflex Reflectors," of Federal Standard 108.

(b) The State Revenue Department shall implement the provisions of this section and Sections 40-12-273, 40-12-274 and, for such purpose, is authorized to promulgate rules and regulations and to adopt plans for such tags or plates, and all decals, slogans, stickers, symbols, characters and other attachments, all of which shall be supplied by the Department of Corrections.

(Acts 1984, No. 84-240, p. 363, §1.)

State Codes and Statutes

Statutes > Alabama > Title32 > Chapter6 > 32-6-57

Section 32-6-57

Manufacturing specifications for license tags or plates.

(a) Effective January 1, 1987, every license tag or plate issued under the provisions of this section and Sections 40-12-273, 40-12-274 shall be manufactured in such a manner as to meet the minimum federal performance standards as set out in Table I of the Society of Automotive Engineers Standard J594e, "Reflex Reflectors," of Federal Standard 108.

(b) The State Revenue Department shall implement the provisions of this section and Sections 40-12-273, 40-12-274 and, for such purpose, is authorized to promulgate rules and regulations and to adopt plans for such tags or plates, and all decals, slogans, stickers, symbols, characters and other attachments, all of which shall be supplied by the Department of Corrections.

(Acts 1984, No. 84-240, p. 363, §1.)

State Codes and Statutes

Back To Homepage

State Codes and Statutes

Statutes > Alabama > Title32 > Chapter6 > 32-6-57

Section 32-6-57

Manufacturing specifications for license tags or plates.

(a) Effective January 1, 1987, every license tag or plate issued under the provisions of this section and Sections 40-12-273, 40-12-274 shall be manufactured in such a manner as to meet the minimum federal performance standards as set out in Table I of the Society of Automotive Engineers Standard J594e, "Reflex Reflectors," of Federal Standard 108.

(b) The State Revenue Department shall implement the provisions of this section and Sections 40-12-273, 40-12-274 and, for such purpose, is authorized to promulgate rules and regulations and to adopt plans for such tags or plates, and all decals, slogans, stickers, symbols, characters and other attachments, all of which shall be supplied by the Department of Corrections.

(Acts 1984, No. 84-240, p. 363, §1.)