36-1632. Labeling of safety glazing
materials


A. Each light of safety glazing material manufactured, distributed, imported,
fabricated or sold for use in a hazardous location, or installed in such a location,
within the state of Arizona shall be permanently labeled by such means as etching,
sandblasting, firing of ceramic material, hot-die stamping, transparent pressure
sensitive labels, or by other suitable means. The label shall identify the labeler,
whether manufacturer, fabricator, installer or other distributor, the type of safety
glazing material, and the fact that the material meets the test requirements of the
American national standards institute (ANSI) standard Z-97.1-1972. The label shall be
legible and visible after installation.


B. Safety glazing labeling shall not be used on other than safety glazing
materials.