State Codes and Statutes

Statutes > California > Prc > 19510-19512

PUBLIC RESOURCES CODE
SECTION 19510-19512



19510.  Except as provided in Section 19511, every manufacturer
shall ensure that the annual tonnage of fiberglass manufactured or
sold in the state by that manufacturer on and after January 1, 1992,
other than fiberglass in inventory manufactured for sale before
January 1, 1992, shall contain at least 10 percent cullet .




19511.  The percentage of fiberglass sold which is made of cullet
shall be calculated in tons used on an annual basis. Unless the
department determines that an increase in the percentage of cullet
would pose an unreasonable technical burden on the fiberglass
manufacturer that exceeds the benefits to recycling the cullet, each
fiberglass manufacturer shall increase the percentage of cullet in
fiberglass in accordance with the following requirements:
   (a) On and after January 1, 1994, until December 31, 1994, the
percentage of cullet shall be 20 percent.
   (b) On and after January 1, 1995, the percentage of cullet shall
be 30 percent.



19512.  On or before January 1, 1994, the department shall request
comments from at least two fiberglass manufacturers, two cullet
processors, and any other interested parties on the feasibility of
increasing the percentage of cullet in fiberglass to 30 percent. On
or before July 1, 1994, the department shall hold a public hearing,
on the record, with representatives from the fiberglass industry,
cullet processors, and other interested parties to determine the
feasibility of increasing cullet content in fiberglass manufacturing.


State Codes and Statutes

Statutes > California > Prc > 19510-19512

PUBLIC RESOURCES CODE
SECTION 19510-19512



19510.  Except as provided in Section 19511, every manufacturer
shall ensure that the annual tonnage of fiberglass manufactured or
sold in the state by that manufacturer on and after January 1, 1992,
other than fiberglass in inventory manufactured for sale before
January 1, 1992, shall contain at least 10 percent cullet .




19511.  The percentage of fiberglass sold which is made of cullet
shall be calculated in tons used on an annual basis. Unless the
department determines that an increase in the percentage of cullet
would pose an unreasonable technical burden on the fiberglass
manufacturer that exceeds the benefits to recycling the cullet, each
fiberglass manufacturer shall increase the percentage of cullet in
fiberglass in accordance with the following requirements:
   (a) On and after January 1, 1994, until December 31, 1994, the
percentage of cullet shall be 20 percent.
   (b) On and after January 1, 1995, the percentage of cullet shall
be 30 percent.



19512.  On or before January 1, 1994, the department shall request
comments from at least two fiberglass manufacturers, two cullet
processors, and any other interested parties on the feasibility of
increasing the percentage of cullet in fiberglass to 30 percent. On
or before July 1, 1994, the department shall hold a public hearing,
on the record, with representatives from the fiberglass industry,
cullet processors, and other interested parties to determine the
feasibility of increasing cullet content in fiberglass manufacturing.



State Codes and Statutes

State Codes and Statutes

Statutes > California > Prc > 19510-19512

PUBLIC RESOURCES CODE
SECTION 19510-19512



19510.  Except as provided in Section 19511, every manufacturer
shall ensure that the annual tonnage of fiberglass manufactured or
sold in the state by that manufacturer on and after January 1, 1992,
other than fiberglass in inventory manufactured for sale before
January 1, 1992, shall contain at least 10 percent cullet .




19511.  The percentage of fiberglass sold which is made of cullet
shall be calculated in tons used on an annual basis. Unless the
department determines that an increase in the percentage of cullet
would pose an unreasonable technical burden on the fiberglass
manufacturer that exceeds the benefits to recycling the cullet, each
fiberglass manufacturer shall increase the percentage of cullet in
fiberglass in accordance with the following requirements:
   (a) On and after January 1, 1994, until December 31, 1994, the
percentage of cullet shall be 20 percent.
   (b) On and after January 1, 1995, the percentage of cullet shall
be 30 percent.



19512.  On or before January 1, 1994, the department shall request
comments from at least two fiberglass manufacturers, two cullet
processors, and any other interested parties on the feasibility of
increasing the percentage of cullet in fiberglass to 30 percent. On
or before July 1, 1994, the department shall hold a public hearing,
on the record, with representatives from the fiberglass industry,
cullet processors, and other interested parties to determine the
feasibility of increasing cullet content in fiberglass manufacturing.


Categories