State Codes and Statutes

Statutes > California > Prc > 19520-19523

PUBLIC RESOURCES CODE
SECTION 19520-19523



19520.  Each fiberglass manufacturer shall, on or before March 1 of
each year, submit a report to the department certifying the number of
tons of cullet used for the manufacture of fiberglass during the
preceding calendar year and the number of tons of fiberglass sold in
the state during the preceding calendar year.


19521.  Every fiberglass manufacturer who submits glass cullet
content usage certification pursuant to Section 19520 may be subject
to an audit by the department to ensure that the cullet was used.



19522.  If a manufacturer of fiberglass is unable to obtain
sufficient amounts of cullet within any certification period, the
manufacturer shall certify this fact to the department and provide
the department with the specific reason for failing to use cullet,
including verification of a best faith effort to use the cullet, and
evidence that the cullet failed to meet minimum quality
specifications pursuant to Chapter 3 (commencing with Section 19515)
and, therefore, presented a significant barrier to meeting the
requirements of Chapter 2 (commencing with Section 19510).




19523.  For the purposes of implementing and enforcing these
provisions, the department shall develop and maintain a list which
identifies all fiberglass manufacturers. The department shall also
make available to fiberglass manufacturers names and addresses of all
recyclers and processors of cullet certified pursuant to Division
12.1 (commencing with Section 14500).


State Codes and Statutes

Statutes > California > Prc > 19520-19523

PUBLIC RESOURCES CODE
SECTION 19520-19523



19520.  Each fiberglass manufacturer shall, on or before March 1 of
each year, submit a report to the department certifying the number of
tons of cullet used for the manufacture of fiberglass during the
preceding calendar year and the number of tons of fiberglass sold in
the state during the preceding calendar year.


19521.  Every fiberglass manufacturer who submits glass cullet
content usage certification pursuant to Section 19520 may be subject
to an audit by the department to ensure that the cullet was used.



19522.  If a manufacturer of fiberglass is unable to obtain
sufficient amounts of cullet within any certification period, the
manufacturer shall certify this fact to the department and provide
the department with the specific reason for failing to use cullet,
including verification of a best faith effort to use the cullet, and
evidence that the cullet failed to meet minimum quality
specifications pursuant to Chapter 3 (commencing with Section 19515)
and, therefore, presented a significant barrier to meeting the
requirements of Chapter 2 (commencing with Section 19510).




19523.  For the purposes of implementing and enforcing these
provisions, the department shall develop and maintain a list which
identifies all fiberglass manufacturers. The department shall also
make available to fiberglass manufacturers names and addresses of all
recyclers and processors of cullet certified pursuant to Division
12.1 (commencing with Section 14500).



State Codes and Statutes

State Codes and Statutes

Statutes > California > Prc > 19520-19523

PUBLIC RESOURCES CODE
SECTION 19520-19523



19520.  Each fiberglass manufacturer shall, on or before March 1 of
each year, submit a report to the department certifying the number of
tons of cullet used for the manufacture of fiberglass during the
preceding calendar year and the number of tons of fiberglass sold in
the state during the preceding calendar year.


19521.  Every fiberglass manufacturer who submits glass cullet
content usage certification pursuant to Section 19520 may be subject
to an audit by the department to ensure that the cullet was used.



19522.  If a manufacturer of fiberglass is unable to obtain
sufficient amounts of cullet within any certification period, the
manufacturer shall certify this fact to the department and provide
the department with the specific reason for failing to use cullet,
including verification of a best faith effort to use the cullet, and
evidence that the cullet failed to meet minimum quality
specifications pursuant to Chapter 3 (commencing with Section 19515)
and, therefore, presented a significant barrier to meeting the
requirements of Chapter 2 (commencing with Section 19510).




19523.  For the purposes of implementing and enforcing these
provisions, the department shall develop and maintain a list which
identifies all fiberglass manufacturers. The department shall also
make available to fiberglass manufacturers names and addresses of all
recyclers and processors of cullet certified pursuant to Division
12.1 (commencing with Section 14500).