215A.6 - PROCEDURE WHEN DEVICE REJECTED. - Iowa Statutes

State Codes and Statutes

Statutes > Iowa > Title-5 > Subtitle-4 > Chapter-215a > 215a-6

        215A.6  PROCEDURE WHEN DEVICE REJECTED.
         1.  Any defective moisture-measuring device, while so marked,
      sealed, or tagged, as provided in section 215A.5, may be used to
      ascertain the moisture content of agricultural products offered for
      sale, processing, or storage, only under the following conditions:
         a.  The person shall keep a record, open to inspection, of
      every commercial sample of agricultural products inspected by the
      tagged device, showing that an adjustment was made on all such
      agricultural products tested.
         b.  The device shall be repaired to comply with section 215A.5
      within a period of thirty days, and the department thereupon
      notified.
         2.  If, upon reinspection, the device is again rejected under the
      provisions of section 215A.5, such device shall be sealed and shall
      not be used until repaired and reinspected.

Section History: Early Form

         [C71, 73, 75, 77, 79, 81, § 215A.6]

Section History: Recent Form

         2009 Acts, ch 41, §263

State Codes and Statutes

Statutes > Iowa > Title-5 > Subtitle-4 > Chapter-215a > 215a-6

        215A.6  PROCEDURE WHEN DEVICE REJECTED.
         1.  Any defective moisture-measuring device, while so marked,
      sealed, or tagged, as provided in section 215A.5, may be used to
      ascertain the moisture content of agricultural products offered for
      sale, processing, or storage, only under the following conditions:
         a.  The person shall keep a record, open to inspection, of
      every commercial sample of agricultural products inspected by the
      tagged device, showing that an adjustment was made on all such
      agricultural products tested.
         b.  The device shall be repaired to comply with section 215A.5
      within a period of thirty days, and the department thereupon
      notified.
         2.  If, upon reinspection, the device is again rejected under the
      provisions of section 215A.5, such device shall be sealed and shall
      not be used until repaired and reinspected.

Section History: Early Form

         [C71, 73, 75, 77, 79, 81, § 215A.6]

Section History: Recent Form

         2009 Acts, ch 41, §263

State Codes and Statutes

Back To Homepage

State Codes and Statutes

Statutes > Iowa > Title-5 > Subtitle-4 > Chapter-215a > 215a-6

        215A.6  PROCEDURE WHEN DEVICE REJECTED.
         1.  Any defective moisture-measuring device, while so marked,
      sealed, or tagged, as provided in section 215A.5, may be used to
      ascertain the moisture content of agricultural products offered for
      sale, processing, or storage, only under the following conditions:
         a.  The person shall keep a record, open to inspection, of
      every commercial sample of agricultural products inspected by the
      tagged device, showing that an adjustment was made on all such
      agricultural products tested.
         b.  The device shall be repaired to comply with section 215A.5
      within a period of thirty days, and the department thereupon
      notified.
         2.  If, upon reinspection, the device is again rejected under the
      provisions of section 215A.5, such device shall be sealed and shall
      not be used until repaired and reinspected.

Section History: Early Form

         [C71, 73, 75, 77, 79, 81, § 215A.6]

Section History: Recent Form

         2009 Acts, ch 41, §263