State Codes and Statutes
Statutes > Maine > Title25 > Title25ch255sec0 > Title25sec2052Title 25: INTERNAL SECURITY AND PUBLIC SAFETY
Part 5: PUBLIC SAFETY
Chapter 255: SAFETY GLAZING
§2052. Labeling required
Each light of safety glazing material manufactured, distributed, imported or sold for use in hazardous locations or installed in such a location within the State of Maine shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material on the safety glazing material or by other suitable means. The label shall identify the labeler, whether manufacturer, fabricator or installer, and the nominal thickness and the type of safety glazing material and the fact that said material meets the test requirements of ANSI Standard Z-97.1-1966 and such further requirements as may be adopted by the Department of Public Safety. [1973, c. 237, (NEW).]
The label must be legible and visible after installation. [1973, c. 237, (NEW).]
Such safety glazing labeling shall not be used on other than safety glazing materials. [1973, c. 237, (NEW).]
SECTION HISTORY
1973, c. 237, (NEW).
